Slurry Tankers / Additional Equipment
Start by selecting a machine:
-
No Wheels
Removes the standard wheel option so the machine is supplied without wheels.
-
550-60 x 22.5 (8 Stud) Wheels
SAP No.
0023-3Dealer Fit - 1hrs
£777.00
These tyres offer excellent floatation and significantly reduce ground compaction, ideal off-road and on wet ground. Please note all prices are in place of standard tyres.
-
16/70 x 20 TT (8 Stud) Wheels
These tyres reduce ground compactions and improve handling in wet conditions. Please note all prices are in place of standard tyres.
-
Mudguards
Reduces spray and dirt from the road hitting the trailer body. Essential option to allow 550 or 560 wheels to be fitted.
-
Hitch Lock
Allows the machine to be secured against theft. Padlock is not included.
-
Full Opening Rear Door
Allows the tanker to easily be washed out to prevent the build up of material in the bottom of the tank.
-
No PTO Shaft
SAP No.
2000£0.00
Removes the standard PTO option from the machine.
-
6" Suction Hose - 20ft
Increases the length of the standard suction hose to 20ft.
-
Rain Gun Spreader
Hydraulically controlled spreader unit that uses the standard pump pressure to spread.
-
No 6" Suction Hose
SAP No.
2732£0.00
Removes the standard 6" suction hose from the tanker.
-
Dribble Bar Preparation
Allows dribble bars to be fitted to the tanker in the future.
-
90 Degree Bend
SAP No.
2301Dealer Fit - 0.25hrs
£195.00
Angles the slurry discharge to the side of the tanker for use in wet conditions.
-
Hand Op. Valve - N/S Rear
SAP No.
2302Dealer Fit - 0.25hrs
£294.00
Assists with loading of the tanker. Positioned on the nearside, rear of the tanker.
-
Ext. Hyd. Op. Valve
SAP No.
2303Dealer Fit - 1hrs
£413.00
Extra hydraulically operated 6" valve. This is in addition to the standard hydraulic valve that controls the flow of slurry to the rear spread plate.
-
Wash Down Hose - Bauer Attach
A useful hose attachment for general washing down jobs.
-
Quick At. Coupling - N/S Front
Allows the hose to be attached with the use of one hand. Please note that price is to upgrade standard side gate valve.
-
Quick At. Coupling - N/S Rear
Allows the hose to be attached with the use of one hand. Please note that price includes fitting manual gate valve and quick attach coupling to nearside, rear of tanker.
-
Easy-connect c/w Hyd Change NS
A simple and quick way to load your tanker without leaving the tractor. Extend the side grab, drive up to the hose until it enters the grab and then hydraulically pull the hose into place. Only available when filling the tanker from the side valve.
-
Sight Tube
Replaces standard sight glass for improve visibility of load level.
-
Hand Op. Valve - O/S Rear
SAP No.
2310Dealer Fit - 0.25hrs
£294.00
Assists with loading of the tanker. Positioned on the offside, rear of the tanker.
-
Hand Op. Valve - O/S Front
SAP No.
2312Dealer Fit - 0.25hrs
£294.00
Assists with loading of the tanker. Positioned on the offside, front of the tanker.
-
Quick At. Coupling - O/S Front
Assists with loading of the tanker. Positioned on the offside, front of the tanker.
-
Quick At. Coupling - O/S Rear
Allows the hose to be attached with the use of one hand. Please note that price includes fitting manual gate valve and quick attach coupling to offside, rear of tanker.
-
Easy-connect c/w Hyd Change OS
A simple and quick way to load your tanker without leaving the tractor. Extend the side grab, drive up to the hose until it enters the grab and then hydraulically pull the hose into place. Only available when filling the tanker from the side valve.
-
2" Ball Valve - Bauer Attach
SAP No.
2316Dealer Fit - 0.25hrs
£275.00
This clamps to any 6" male bauer coupling and allows a variety of hoses to be connected.
-
No Hand Op. Valve - N/S Front
SAP No.
2318£0.00
Removes the N/S Front Valve option.
-
60mm Hose - Bauer Attach
SAP No.
2319Dealer Fit - 0.25hrs
£261.00
This clamps to any 6" male bauer coupling and comes complete with a 60mm hose. Ideal for clearing drains.
-
6" Suction Hose Mesh Strainer
Prevents stones or other debris from being sucked up during filling.
-
Tanker Hydraulic Hatch
Allows easy filing of tanker from pumps or overhead storage.
-
Tanker Horizontal Hyd Hatch
SAP No.
2102£3,250.00
Allows easy filing of tanker from pumps or overhead storage.
-
6" Hose Carrier - O/S
Adds extra hose carriers to allow hose storage on both sides of the tanker.
-
No Hose Carriers
Removes all hose carriers from the tanker.
-
No Pump
SAP No.
2200£0.00
Removes the standard vacuum pump from the tanker.
-
Garda Pump c/w Spreader
Can be used for high pressure spreading of slurry over hedges or for dust reduction in quarries.
-
10,000ltr Pump
Allows tankers to be filled quicker.
-
Hydraulic Pump
Removes the requirement of a PTO Shaft. Improves safety and removes the possibility of damaging a PTO shaft.
-
Pump Hydraulic Changeover
Allows the pump to change between pressure and vacum hydraulically.
-
LED Lights
Improved visibility of the machine and reduces maintenance of lights.
-
LED Beacon
Ideal if the machine is frequently used on the road.
-
Dual Lights
These lights further improve the visibility of the machine and are positioned to prevent them being covered with mud or slurry.
-
Colour - Marshall Blue
Bespoke colour option, allowing customer to customise the trailer.
-
Colour - Maserati Blue
Bespoke colour option, allowing customer to customise the trailer.
-
Colour - John Deere Green
Bespoke colour option, allowing customer to customise the trailer.
-
Colour - Claas Green
Bespoke colour option, allowing customer to customise the trailer.
-
Colour - Fendt Green
Bespoke colour option, allowing customer to customise the trailer.
-
Colour - Gloss Black
Bespoke colour option, allowing customer to customise the trailer.
-
Colour - Ferrari Red
Bespoke colour option, allowing customer to customise the trailer.
-
Colour - Case Red
Bespoke colour option, allowing customer to customise the trailer.
-
Colour - Kubota Orange
Bespoke colour option, allowing customer to customise the trailer.
-
Colour - JCB Yellow
Bespoke colour option, allowing customer to customise the trailer.
-
Colour -Highway/Traffic Yellow
Bespoke colour option, allowing customer to customise the trailer.
-
Colour - White
Bespoke colour option, allowing customer to customise the trailer.
-
Colour - Gunmetal Grey
Bespoke colour option, allowing customer to customise the trailer.
-
Delivery
Delivery charge to any UK mainland address.
Price & Configure:
Use our online configuration tool to design and price your ideal Marshall machine.
Recent news
-
Harvest Ready and Winter Coming
To make sure that you’re ready for the season and... read more
-
Harvest Ready
After a year of challenging conditions, especially in light... read more
-
QM Range Window
When your trailer is getting filled by a combine or... read more